Better Digital Imaging Solutions....NOW!
SYSTEMS
|
X
Better Digital Imaging Solutions....NOW! |
SYSTEMS |
|
FSE 3 Chip Color System Back to SYSTEMS
The FSE 3 Chip Color System is a robust, user friendly, high productivity, color imaging suite of totally integrated components.
The FSE 3 Chip Color System is based on a choice of one of the three Megaplus 3 chip multi-spectral cameras. These high-resolution digital cameras feature a spatial resolution from 1.4 million to 2.0 million pixels, 10 bits of dynamic range and the ability to expose up to ten images per second. The selected camera is interfaced to an FSE computer system. The three sensors, each with their own filter, provide excellent color rendition across the color spectrum.
The FSE 3 Chip Color System suite consist of a Megaplus multi-spectral digital color camera, an EDT PCI DVK interface board, a 2GHz processor with 1GB of memory and a 40GB hard drive, 19" flat panel LCD and FSE acquisition software.
Resolution Up to 2,074,000 pixels provide the high resolution required for color graphic scanning, film conversion and medical applications.
Quality The three sensors with color filters provide a single exposure, 30 bit true color image with excellent color rendition.
Ease of Use With a comprehensive command set and bundled control software, the FSE 3 Chip Color System provides the ease of use you expect from FSE's family of unique imaging systems.
FSE 3 Chip Color System PERFORMANCE SPECIFICATIONS (Based on Megaplus MS 4100 Camera) CCD Imager Imaging Device Kodak KAI 2093M CCD Sensor Readout Interline, progressive scan Sensitivity Microlenses Pixel Size 7.4 µm (square format) Resolution 1920 x 1080 pixels (2,073,600) Pixel Spacing 7.4 µm, vertical and horizontal Active Area 14.2mm horizontal x 8.0mm vertical Fill Factor 60%
Image Quality Image Uniformity <5% non-uniformity Responsivity 2680 to 42800 8-bit counts/µW/cm 2 –second @ 550 nm Bit Depth 8 bits, 10 bits, 12 bits Dynamic Range 58dB Linearity >0.07% rms non-linearity @ 6dB gain Dark Current <10pA/cm 2 @ 25°C
Camera Exposure and Control Camera Output Camera Link, LVDS Pixel Clock Rate 12 MHz Frame Rate 10 FPS Exposure Settings Mechanical shutter: 10 to 100,000 ms Operation Modes Continuous, Control, Trigger Gain Settings 0 to 36dB
Mechanical Description Lens Mount F Mount Communication Camera Link, LVDS Dimensions 3.15” H x 3.82” W x 5.79” L (80mm x 97mm x 147mm) Weight 3.2 lbs (1.6 kg)
Environmental Requirements Operating Temp 0° to 35°C (32° to 95°F), non-condensing Vibration 3G, sinusoidal from 5 to 150 Hz Shock 20G, non-operating
Power Requirements Input Voltage 12 VDC Power Consumption 15 watts, typical
Framegrabber Interface EDT PCI DVK digital camera interface Power Consumption 1A @ 5 volts Weight 3.8 oz
Computer Processor Intel Operating System Microsoft Windows Speed 2GHz Memory 1GB Hard Drive 40GB CD-RW Drive 48X Display 19" Power Consumption 150 Watts Weight 19 lbs
Software Interface EDT C-language interface library Control EDT contro capture and display program Acquisition FSE Image Acquisition Software Analysis FSE Image Analysis Software
Support Installation Available from FSE at hourly rate plus travel Training Available from FSE at hourly rate plus travel Warranty FSE provides 1 year warranty on all components Expansion FSE provides support from phone consultation to custom design of hardware and/or software at an hourly rate.
Note: Specifications are typical and subject to change. 07-03
A P S H OT |
|
|
This page was last edited on: Wednesday June 14, 2006 01:33 PM |