Better Digital Imaging Solutions....NOW!
IMAGERS
|
X
Better Digital Imaging Solutions....NOW! |
IMAGERS |
|
FSE 6.3F Color Filter Wheel Color Camera Back to IMAGERS
The FSE 6.3F Color Filter Wheel Color Camera is a robust, user friendly, high productivity, color imaging camera with totally integrated components.
The FSE 6.3F Color Filter Wheel Camera is built around the Megaplus 6.3i full frame cameras. This high-resolution digital cameras features a spatial resolution of 6.3 million pixels, 10 bits of dynamic range and the ability to expose a true color image in 3.3 seconds. The camera is interfaced to an FSE 4 channel color filter wheel. The 9 µm square pixels with 100% fill factor provide excellent light sensitivity. The color filter wheel provides excellent color rendition across the color spectrum.
The camera comes with easy to use FSE color acquisition software.
Resolution Up to 6,291,456 pixels provide the very high resolution required for color graphic scanning, film conversion and medical applications.
Quality The FSE 4 channel color filter wheel provides a 30 bit true color image with excellent color rendition.
Ease of Use With a comprehensive command set and bundled control software, the FSE 6.3F Color Filter Wheel Color Camera provides the ease of use you expect from FSE's family of unique imaging products. FSE Color Filter Wheel Color System PERFORMANCE SPECIFICATIONS (Based on Megaplus 6.3i Camera) CCD Imager Imaging Device Kodak KAF 6303E Blue Plus Full Frame CCD Sensor Readout Full Frame Transfer Sensitivity Enhanced Blue Plus Pixel Size 9 µm (square format) Resolution 3088 x 2056 pixels (6,291,456) Pixel Spacing 9 µm, vertical and horizontal Active Area 27.65mm horizontal x 18.48mm vertical Fill Factor 100%
Image Quality Image Uniformity <5% non-uniformity Responsivity 2680 to 42800 8-bit counts/µW/cm 2 –second @ 550 nm Bit Depth 8 bits, 10 bits Dynamic Range 68dB Linearity >0.07% rms non-linearity @ 6dB gain Dark Current <10pA/cm 2 @ 25°C
Camera Exposure and Control Camera Output Digital Video Pixel Clock Rate 10 MHz Frame Rate 1.3 fps MONO 0.3 fps COLOR Exposure Settings Mechanical shutter: 10 to 100,000 ms Operation Modes Continuous, Control, Trigger Gain Settings 0 to 24dB in steps of 2dB
Mechanical Description Lens Mount F Mount Communication LVDS or Camera Link Dimensions 4.45” H x 3.9” W x 7.09” L (113mm x 99mm x 180mm) Weight 4.0 lbs (1.68 kg)
Environmental Requirements Operating Temp 0° to 35°C (32° to 95°F), non-condensing Vibration 3G, sinusoidal from 5 to 150 Hz Shock 20G, non-operating
Power Requirements Input Voltage 12 to 28 VDC Power Consumption 10 watts, typical
Color Filter Wheel Format Four Channel (3 Filter + Clear) Filters Standard Color Separation Power Consumption 2 Watts Weight 16 oz
Software CFW Interface FSE CFW Interface Software Acquisition FSE Image Acquisition Software Color Processing FSE Image Procesing Software
Support Installation Available from FSE at hourly rate plus travel Training Available from FSE at hourly rate plus travel Warranty FSE provides 1 year warranty on all components Expansion FSE provides support from phone consultation to custom design of hardware and/or software at an hourly rate.
Note: Specifications are typical and subject to change. 07-03 A P S H OT |
|
|
This page was last edited on: Wednesday June 14, 2006 01:33 PM |