Better Digital Imaging Solutions....NOW!
SYSTEMS
|
X
Better Digital Imaging Solutions....NOW! |
SYSTEMS |
|
FSE Color Filter Wheel Color System Back to SYSTEMS
The FSE Color Filter Wheel Color System is a robust, user friendly, high productivity, color imaging suite of totally integrated components.
The FSE Color Filter Wheel System is based on a choice of one of four Megaplus full frame cameras. These high-resolution digital cameras feature a spatial resolution from 1.4 million to 6.3 million pixels, 10 bits of dynamic range and the ability to expose up to six images per second. The selected camera is interfaced to an FSE 4 channel color filter wheel. The 9 µm square pixels with 100% fill factor provide excellent light sensitivity. The color filter wheel provides excellent color rendition across the color spectrum.
The FSE Color Filter Wheel Color System suite consist of a Megaplus digital camera with an FSE color filter wheel, an EDT PCI DVK interface board, a 2GHz processor with 1GB of memory and a 40GB hard drive, 19" flat panel LCD and FSE acquisition software.
Resolution Up to 6,291,456 pixels provide the high resolution required for color graphic scanning, film conversion and medical applications.
Quality The FSE 4 channel color filter wheel provides a 30 bit true color image with excellent color rendition.
Ease of Use With a comprehensive command set and bundled control software, the FSE Color Filter Wheel Color System provides the ease of use you expect from FSE's family of unique imaging systems.
FSE Color Filter Wheel Color System PERFORMANCE SPECIFICATIONS (Based on Megaplus 6.3i Camera) CCD Imager Imaging Device Kodak KAF 6303E Blue Plus Full Frame CCD Sensor Readout Full Frame Transfer Sensitivity Enhanced Blue Plus Pixel Size 9 µm (square format) Resolution 3088 x 2056 pixels (6,291,456) Pixel Spacing 9 µm, vertical and horizontal Active Area 27.65mm horizontal x 18.48mm vertical Fill Factor 100%
Image Quality Image Uniformity <5% non-uniformity Responsivity 2680 to 42800 8-bit counts/µW/cm 2 –second @ 550 nm Bit Depth 8 bits, 10 bits Dynamic Range 68dB Linearity >0.07% rms non-linearity @ 6dB gain Dark Current <10pA/cm 2 @ 25°C
Camera Exposure and Control Camera Output Digital Video Pixel Clock Rate 10 MHz Frame Rate 1.3 fps Exposure Settings Mechanical shutter: 10 to 100,000 ms Operation Modes Continuous, Control, Trigger Gain Settings 0 to 24dB in steps of 2dB
Mechanical Description Lens Mount C or F Mount Communication LVDS Dimensions 4.45” H x 3.9” W x 5.84” L (113mm x 99mm x 148mm) Weight 3.0 lbs (1.26 kg)
Environmental Requirements Operating Temp 0° to 35°C (32° to 95°F), non-condensing Vibration 3G, sinusoidal from 5 to 150 Hz Shock 20G, non-operating
Power Requirements Input Voltage 12 to 28 VDC Power Consumption 8 watts, typical
Framegrabber Interface EDT PCI DVK digital camera interface Power Consumption 1A @ 5 volts Weight 3.8 oz
Computer Processor Intel Operating System Microsoft Windows Speed 2GHz Memory 1GB Hard Drive 40GB CD-RW Drive 48X Display 19" Power Consumption 150 Watts Weight 19 lbs
Software Interface EDT C-language interface library Control EDT contro capture and display program Acquisition FSE Image Acquisition Software Analysis FSE Image Analysis Software
Support Installation Available from FSE at hourly rate plus travel Training Available from FSE at hourly rate plus travel Warranty FSE provides 1 year warranty on all components Expansion FSE provides support from phone consultation to custom design of hardware and/or software at an hourly rate.
Note: Specifications are typical and subject to change. 07-03
A P S H OT |
|
|
This page was last edited on: Wednesday June 14, 2006 01:33 PM |